Inspecting a Vertical Machining Center

vertical machining centerThere’s no question that it’s happened to all of us. You find yourself looking through various classified listings and finally come across that specific car or piece of equipment that you have been searching for. Then you find yourself asking the simple question; is this deal to good to be true?

It is important, especially when it comes to online purchases, to investigate a piece of machinery that we are considering. Luckily, there are a few ways that will help us know if the machinery is a good buy or not.

Follow these steps before buying a used vertical machining center:

The Best Steps for Vertical Machining Center Inspection

Sometimes overlooked, the first step in the Vertical Machining Center inspection process is to make sure the machine is still in good condition. This can be done by the first impression that the machine gives you.? Is it clean? Is there anything that is clearly wrong with the equipment?

After the Vertical Machining Center has passed your initial evaluation, it will be time to perform an in-depth inspection of its operational components. If you are unfamiliar with the machine’s various parts, here is a breakdown of the most important components.

VMC spindleThe Spindle

Located inside the machine’s headstock, the spindle is operated by a belt that connects from one pulley to another. Without a spindle, the Vertical Machining Center cannot perform its specific job functions. As this is likely the most important machine part, you will need to inspect this component to ensure that the machinery is operating properly.

The Cutter

The next important thing that you will need to check is the cutter.? The cutter is a specialized bar with teeth that looks similar to a saw. When the Vertical Machining Center is working properly, the cutter will move downward in a rapid motion in order to cut and shape certain materials. You’ll want to make sure the cutter itself is in good condition and that it is functioning properly.

vertical machining center cutterInspecting Vertical Machine Centers Online

Because it is difficult to physically inspect a Vertical Machining Center that is being sold online, you will have to use various outlets to ensure that you are receiving a fully operational piece of equipment. One simple way to determine if the machine is in good condition and working properly is to have the owner send you a picture or video of the machine in action.

If the owner is going to send a video of the machine, you will want to receive as many different clips of operational areas as possible. Another option is to communicate with the owner via Skype (or a similar program) so that you can have a live view of the Machining Center in action.

By doing this, you will also be able to ask any specific questions that you might have about how the machine is operating. Although it is more difficult to inspect a machine from an online sale, there are certain ways to ensure that you will be purchasing a good product.

Inspecting An Engine Lathe

Everyone has had that moment: You are reading the local classifieds (or Craigslist nowadays) and you see an incredible deal on that used Toyota SUV you’ve been desperately looking for. But what if it’s too good to be true? Or maybe it is true? There isn’t much time…. Should you go for it?

Engine Lathe For SaleMore often than not, we must evaluate machinery without ever getting to see or hear it run under power. Sometimes there is little time to make a detailed evaluation, however it is possible to get a reasonable idea of a machine’s condition without ever hearing it run.

Steps For Proper Engine Lathe Inspection

The first step is to determine whether the owner appears to take good care of his equipment in general. A clean, well organized shop is generally a good sign that the machines were handled by someone who cared about their well-being.

The next step is to spend some time familiarizing yourself with Lathe nomenclature, components, and basic operations. ?But fear not, the following is a summary of the components that we feel are the most important when inspecting and evaluating the purchase of an engine lathe:

The bed ways

The heart and soul of any lathe is its bed ways. Its condition will determine the accuracy that the engine lathe will be capable of delivering. Because of this, some experts believe this has the greatest effect on the overall value of the equipment. This idea holds true for other types of machines as well.

Ideally, the ways should be perfectly even and parallel, allowing the carriage to travel parallel to the axis of the spindle. The tailstock center would then be perfectly on center with the headstock spindle. Every used machine has some degree of bed wear. Your goal will be to determine the severity of the wear.

Ideally, cutting a test bar between centers can be the best way to test a lathe’s accuracy. Unfortunately, circumstances seldom permit such a test.

The headstock

The condition of the spindle and spindle bearings is the next most important thing to check. If either is damaged or worn out beyond repair, you are looking at a costly replacement.?Running the spindle is very useful to determine bearing condition, but again, this is not always possible.

If you are able to run the machine, run the spindle at one of the higher speed settings for a few moments. Look for any unusual noises. Feel the bearings after the spindle has been running for some time, they should not be too hot to touch.

If it’s not possible to run the spindle, it’ll be important to rely on your sense of how the bearings feel, how much slop or play is in the spindle etc.

The back gears (if equipped)

If the gears are accessible and visible, you might want to inspect them for broken, chipped, or worn teeth. If they are not accessible, the next best thing would be to listen to them run. Damaged gears can be expensive to replace.

Other components you might want to check: ?the geartrain, gearbox and leadscrew . Also the carriage, apron, and compound.

Online Machine Tool Inspection

When inspecting used equipment for sale online, it can be most difficult to inspect. So, it is important to make use of some of the online tools which are available. You could ask for video of the machine running and ask that each of the areas covered above are focused on. Pictures can also help, but video is best.

Using Skype or other live video chat program can also be helpful to view the machine running and be able to ask questions at the same time.

Click here to browse engine lathes for sale