JIZZ护士奶水太多

  • <sub id="lhs77"><meter id="lhs77"><input id="lhs77"></input></meter></sub>
        <sub id="lhs77"><meter id="lhs77"><input id="lhs77"></input></meter></sub>
          1. buy & sell, new & used machinery, machine tools & equipment

             
            Machine Tools > Millers & Milling Machines > Vertical & Horizontal Millers CNC    < Back

            Atrump / Remedy Machining Center ATC * Chip auger - $39,500

            Item Number: #00153656
            Atrump / Remedy Machining Center ATC * Chip auger

            Atrump / Remedy Machining Center ATC * Chip auger
            Price: $39,500
            Subcategory: 

            Vertical & Horizontal Millers CNC

            Table width16"
            Table length58"
            Year of Manufacture:  2020
            Manufacturer:  Atrump-Remedy
            Model:  B9-AC-FE-CA
            Condition: Rebuilt

            EC EDM & Remedy Machine Sales, LLC. Edward Tremblay Phone: 215-540-0404 email: [email protected]

            Used Atrump/Remedy B9AC M 400 3 Axis CNC Bed Mill
            Serial Number B9AC-60029 Updated 5-2020

            Very low hours of use, used Remedy 50x24, ATC, Full enclosure, chip auger machining center w/Updated Centroid M400 very easy to use Conversational control. It has Turcite covered Square Box Ways on the Y and Z axis allowing accurate heavy duty machining.

            Remedy serviced and updated machining center 5-2020.

            Used Remedy Fully Equipped Machine Package:
            1) Remedy Machining Center: Centroid Conversational and Fanuc G code programming,
            6000 RPM 15 HP Programmable Spindle, Full Enclosure,
            Smart Auto Lube, Programmable Flood Coolant …………………………
            1) B9-FE: Full Enclosure for the B9. Note, End cap sections are removable ………….
            1) B9 Chip Conveyor with dump cart with manual On/Off and reversing controls
            1) B9-YDS-75 Closed Loop Servo Drive System w/3 SEM 40 In/lb. servo motors …
            1) Clean rigid Metal way covers, Coolant wash gun, manual air blast chip removal
            1) Rigid Tapping, MPG Handwheel and Drivers installed ..........
            1) Complete machine and control Tune Up, new parts and labor as described below
            – Machine in ready condition …
            Price of this used machine tool as described ………. $ 39,500.00
            Reference: New BM-560T-FE-16 ATC-Chip Auger……. $ 90,000.00+

            Completed Machine tune up: Clean and ready at our Southampton PA facility.
            We replaced all worn items including: Replaced the M400 control mother board and motherboard battery, New SSDD updated with the newest Linux software, Cleaned the machine and touch up painted it where needed,
            Replaced all plastic air lines, Cleaned and tested the chip and coolant system.
            We cleaned the coolant system, and the machine table.
            We tuned the drives, checked and fine tuned the machines gibs, and then drag test all axes.
            We check all functions and live tested the machine, including spindle and the ATC system w/500+ cycles during our 35 hours of operational QC testing.

            GENERAL DESCRIPTION Machine:
            Machine Weight 9,800 lbs. Area Requirements: 190 Wide x 100 Deep x 105” High
            Y & Z Square Box Ways Hardened/Ground and "Turcite B" covered.
            Precision Ground Double Nut Ball Screws: X, Y, & Z Axes
            Coolant and Chip auger system

            Machine Travel and Table:
            Travels X axis..... 50.3 inches Y axis..... 22 inches Z Axis..... 24.4 inches
            Table 16 x 58" Hardened and Precision Ground Table Load ….. 1400 Lbs.
            Metal Way Covers Y axis Front and Rear and Z axis

            Spindle:
            15 HP Spindle Motor Spindle Speeds: 170 to 6000 programmable
            CAT #40 Taper Spindle 20 Station ATC

            Centroid M400 Features: Updated CPU Hardware and Linux Software
            Very Easy To use Control
            Intercon Conversational Programming System & Fanuc G-codes
            PC Based 32 Bit DSP Technology with (4) USB Drive ports
            New SSDD with 10 Gigabyte program storage.
            "No Pause" 3 axis Constant Velocity Machining
            12 Inch Color LCD with Color Graphics
            (4) USB ports & DNC port
            Sealed Mylar Push button Keyboard with Tactile and Audible Feedback
            (Looks like New )

            Many Centroid Software and Hardware options are available
            Get the full quote for all of these items!

            DELIVERY:
            Approximately 1 week after receipt of a firm purchase order and down payment.

            F.O.B. POINT: ECEDM Southampton PA 18966


            Best Regards
            Edward Tremblay

            This is Valid for 1 used machine
            End.

            Contact Seller

            This machine is listed for sale by ECEDM & Remedy Machine Sales, LLC located in Levittown, Pennsylvania

            Contact the Seller
             
            ECEDM & Remedy Machine Sales, LLC
              2 Sunflower Rd
            Levittown
            PA 19056
            United States
             
            Request Call from Seller Email seller
            View sellers full listings/Website

            Email Seller

            Name*:
            Email*:
            Phone*:
            Address (including City, State)*:
            Company*:
            Comment*:
            Type the code shown*:
            Security Code
            Send Email
            * Mandatory field
            Note: For security all enquiries may be monitored
            Print Advert Tell a Friend
            Add to Watch List Report Advert
            * Report advert as sold or incorrect details
             
            JIZZ护士奶水太多
          2. <sub id="lhs77"><meter id="lhs77"><input id="lhs77"></input></meter></sub>
                <sub id="lhs77"><meter id="lhs77"><input id="lhs77"></input></meter></sub>